Cisco stack upgrade license procedure

Cisco stack upgrade license procedure

1. Copy licenses of each stack member to the flash

2. Copy licenses to members flash: 

copy flash: flashX: (where X is member number and flash number)

3. Run license installation for each flash:

license install flash1:xxxxxxxxxx.lic
license install flash2:yyyyyyyyyy.lic
(Different license for each switch/flash)

4. Configure license boot for each switch:

sw01(config)#license boot level ipservices switch 1

Accept "End User License Agreement" (EULA)
If you do then it actually displays a very long message, and in the end it asks you if you would like to ACCEPT? (Yes/ No): --- if you choose "yes"

sw01(config)#license boot level ipservices switch 2
Accept "End User License Agreement" (EULA)
If you do then it actually displays a very long message, and in the end it asks you if you would like to ACCEPT? (Yes/ No): --- if you choose "yes"
If you don’t see the EULA for the member – it won’t be upgraded

5. Verify license for next boot with -show version- command

For master switch:

License Level: ipbase
License Type: Permanent
Next reload license Level: ipservices

For all members:

Switch 02
---------
Switch Uptime                   : 5 days, 4 hours, 25 minutes 
Base ethernet MAC Address       : 00:06:F6:8E:D8:80
Motherboard assembly number     : 73-12530-08
Motherboard serial number       : FDOabcdef
Model revision number           : A0
Motherboard revision number     : A0
Model number                    : WS-C3750X-24T-S
Daughterboard assembly number   : 800-32727-03
Daughterboard serial number     : FDOabcdef
System serial number            : FDOxxxxxxx
Top assembly part number        : 800-31327-07
Top assembly revision number    : B0
Version ID                      : V04
CLEI Code Number                : COMJV00ARD
License Level                   : ipbase
License Type                    : Permanent
Next reboot licensing Level     : ipservices

6. Reboot the stack with -reload- command